[Hardware] Brief introduction of stamping die structure of stamping factory

The existence of a mold in a stamping processing plant is essential, so what is its structure? Let's take a look with the author below. First, the stamping die is a tool that separates or deforms the sheet metal. A typical die structure is composed of two parts, an upper die and a lower die. The die handle of the upper die is fixed on the slider of the punch and moves up and down with the slider, while the lower die is fixed on the worktable of the punch. The punch and the die are the working parts of the die that deform or separate the blank, and are fixed on the upper and lower templates with a pressure plate. The upper and lower templates are respectively equipped with guide sleeves and guide posts to guide the alignment of the punch and the die. The guide plate and the positioning pin are respectively used to control the feeding direction and length of the blank. The function of the discharge plate is to release the workpiece or blank from the punch after punching. The metal stamping factory has 15 years of experience in mold production, and more than 20 senior design engineers, choose to rest assured. support hotline: