Hardware for you to talk about the safety technical measures for the operation of metal stamping parts (hardware)

1. Metal stamping parts operation safety tools must be used in the operation of metal stamping parts. During the stamping process, use safety tools to put the product blanks into the mold and take out the stamped products and waste materials to achieve out-of-mold operations and avoid direct hands. Reach into the mold to ensure the safety of workers. (2) Reasonable design of molds reduces the danger zone of stamping molds. (3) Design automatic or mechanical feeding. 3. The safety protection of the punching machine during the operation of metal stamping parts (1) Mechanical protection Push-hand type. This is a protection device that is linked with the punch slider and pushes the worker's hand away from the die through the swing of the baffle. Swing rod hand guard. It is a device that uses the principle of leverage to move the hand away. Handle safety device. It is a device that uses pulleys, levers, and ropes to link the hand movements of the workers with the movement of the slider. (2) Double-switch control system Only when the stamper's hands press the two buttons at the same time, the slider will start. This completely eliminates the possibility that the worker puts his hand into the mold and the punch starts. (3) Safety grating A punch with a safety grating is equivalent to forming a protection zone for the entire dangerous area. When a worker enters the protection area of u200bu200bthe safety grating, the punch cannot be started. Need to know more, welcome to consult: