Hardware stamping parts customization, those knowledge points you have to know [hardware]

The customization of metal stamping parts, on the surface, is to send your needs to the stamping manufacturer, and deliver on time and quality. In fact, it is not so simple. Xiaoshuo will take you to understand: 1. The material report of the selected raw materials. This is a source problem, which is directly related to the later use and function of your product. 2. Formability test. Perform bending test and cupping test on the material to determine the work hardening index n value and the plastic strain ratio r value of the material. Regarding the test method of steel sheet formability, it can be carried out in accordance with the provisions of sheet steel formability and test method. 3. Process quality control. Although the original intention of each factory is to produce qualified products, if the process control is not in place, there will be a risk of poor manufacturing and poor outflow. 4. Transportation hazards. For some products with surface and precision requirements, improper transportation will cause collision and extrusion. Hardware, 15 years of ingenuity and focus on hardware stamping parts customization, 20,000+ sets of mold making production experience, monthly processing capacity of 100+ sets of stamping dies, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, 16 quality inspections strictly for quality check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, what you choose is rest assured and worry-free!