Hardware stamping parts manufacturer, regarding the design of blank station of continuous stamping die

When designing continuous stamping dies for metal stamping parts manufacturers, generally experienced designers will add one or two more blank workers to the stamping dies. This is a very important action. There is enough space to repair and adjust the stamping parts when the mold trial is unsuccessful. Xiaoshuo will understand with you: The continuous drawing die is a continuous drawing on a long strip without material annealing and other treatments. It has the characteristics of high production efficiency, process saving, and automatic stamping. For the continuous drawing die of multi-pass drawing, when designing the layout drawing, one or two empty stations are often left after drawing, and some room is left so that appropriate changes and adjustments can be made after the trial. For gland parts, there is an empty station between the primary drawing and the secondary drawing. In addition, when the punch or die hole is too close, to protect the punch, die inserts, small mold bases, cemented carbide inserts and other structures, also leave aside on the layout drawing Vacancy. Leave an empty station between the shaping step and the blanking step to facilitate the installation of the die and the unloading plate, and improve the strength of the die. Hardware, 15 years of ingenuity and focus on metal stamping parts manufacturer, 20,000+ sets of mold customization production experience, monthly processing capacity of 100+ sets of stamping dies, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, 16 quality inspections Quality control. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!