Hardware stamping parts processing plant in Henan Province, process type + 20 mold R u0026 D design engineers

The stamping process can be roughly divided into two categories: separation process and forming process (also divided into bending, drawing, and forming). The technicians of the metal stamping parts processing plant in Henan Province have said about this knowledge. Xiaoshuo compiled some information, and let you talk about it below: The separation process is to make the stamping part and the blank follow a certain contour line during the stamping process. At the same time, the quality of the separated section of the stamping part must meet certain requirements; the forming process is to make the stamping blank undergo plastic deformation without being damaged, and transform it into the required finished shape, while also meeting dimensional tolerances and other aspects. Claim. According to the temperature during stamping, there are two methods: cold stamping and hot stamping. This depends on the strength, plasticity, thickness, degree of deformation, and equipment capabilities of the material, and the original heat treatment state and use conditions of the material should be considered. Hardware, 15 years of ingenuity and focus on metal stamping parts processing, 20000+ sets of stamping die customization production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, 16 quality inspection layers are strict check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!