Hardware stamping parts processing plant in Henan Province, stamping method classification + 16 strict quality inspections

Stamping methods are divided into two categories, cold stamping and hot stamping. The employees of the metal stamping parts processing plant in Henan Province have mentioned these two stamping methods. Xiaoshuo has collected some knowledge, and I will share with you below: 1. Cold stamping: metal processing at room temperature, generally suitable for thickness less than 4mm Blank. The advantages are no heating, no scale, good surface quality, easy operation and low cost. The disadvantage is that there is work hardening, which makes the metal lose further deformation ability in severe cases. Cold stamping requires that the blank has a uniform thickness and a small fluctuation range, with a smooth surface, no spots, and no scratches. 2. Hot stamping: A stamping method that heats metal to a certain temperature range. The advantage is that it can remove the internal stress, avoid work hardening, increase the plasticity of the material, reduce the deformation resistance, and reduce the power consumption of the equipment. Hardware, 15 years of ingenuity and focus on metal stamping parts processing, 20000+ sets of stamping die customization production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, 16 quality inspection layers are strict check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!