Hardware stamping processing plants, seeing and hearing to distinguish the problems of stamping dies【Hardware】

In metal stamping processing plants, when stamping dies reach a certain degree of work, different wear conditions will appear. You can find these problems by watching and listening. Xiaoshuo will take you to understand: 1. Check the fillet of the cutting edge. If the fillet radius reaches R0.1 mm (R value must not exceed 0.25 mm), sharpening is required. 2. Check the punching quality, whether there are large burrs? 3. Judge whether sharpening is required by the noise of the machine punching. If the noise is abnormal during the stamping of the same die, it means that the punch is blunt and needs to be sharpened. 4. If the edge of the cutting edge becomes rounded or the rear of the cutting edge is rough, sharpening should also be considered. Hardware, 15 years of ingenuity and focus on metal stamping processing plants, 20,000+ sets of mold customization production experience, monthly processing of 100+ sets of molds, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, 16 quality inspection layers strictly . It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, the choice is peace of mind and peace of mind!