Hardware tells you the safety awareness precautions in the process of precision stamping parts

What do precision stamping parts do? It is a process that uses punches and dies to deform or break stainless steel, iron, aluminum, copper and other plates and other materials to achieve a certain shape and size. So is there any danger in the production of this kind of precision stamping parts? Yes, but as long as the correct operation and compliance with the processing system, the safety factor will be much higher. 1. During the processing of precision stamping parts, for safety reasons, pay attention to the adjustment screw of the slider and do not let it extend too long. In the processing of metal stamping parts, in order to prevent the mold from moving, a layer of paper can be added during reinforcement. The rotation of the mold is a very dangerous situation. For the safety of stamping parts processing, disassembling the mold must wait until the machine completely stops running before proceeding. 2. During the processing of precision stamping parts, if you need to adjust and install the mold, you must turn off the power before proceeding. Although it can be done without turning off the power, the risk index will greatly increase. Therefore, for safety, the power must be fully Operate after turning off the machine completely. 3. In the processing of precision stamping parts, the existence of fastening screws will have a certain protective effect on the processing safety of metal stamping parts. In order to prevent this guarantee from becoming a hidden danger, the fastening screws must be fastened frequently to ensure that they are fastened. Screws can play a safety function. According to the above hardware author, it is expected to be safe to operate, if you need to know more, welcome to consult: