Hardware tells you the service and cooperation of stamping parts processing with the speed of response

Samples will be produced in two days, you first understand the sample process of stamping parts processing. The first is the design and drawing of the product, and then the simple tooling is designed, and then the unfolded shape of the product is made by wire cutting or corroding the raw material, and then it is placed in the tool for bending and forming. After completing these processes within two days, it can be seen that there is no waste in the process of connecting the hardware. Look at the die process of stamping parts. First of all, it is also the design of the drawings. The normal design time for a set of molds is 4-6 hours. Then prepare materials and drill holes. Be sure to send the template to the heat treatment plant on the same day for the hardness treatment of the template. The 24-hour heat treatment and tempering time must be completed. If the time is not enough, the life and safety of the mold steel cannot be guaranteed. The third day is the time of wire cutting, one set of mold processing is completed day and night. The fourth day is the assembly of the mold. For the die processing of stamping parts, four days can definitely be regarded as the Dongguan speed. Hardware, with the goal of customer results for 15 years, complete every work assigned by the customer. contact number: