Hardware tells you what properties are required for precision stamping materials!

Precision stamping parts materials need to have the following attributes: 1. Stamping performance of precision stamping parts materials: 1. Precision stamping parts materials should be easy to obtain high-quality and high-precision stamping parts, which is convenient for production and processing. 2. The limit deformation degree and the total limit deformation degree of the one-time stamping process of precision stamping materials should be large enough to facilitate the improvement of production efficiency. 3. The material of precision stamping parts should have low loss and wear of precision stamping parts and molds, and it is not easy to produce waste products, which is convenient for increasing output. 2. Process requirements that should be met by stamping materials for precision stamping parts: 1. The thickness tolerance of precision stamping parts should meet national standards: different die gaps are suitable for materials of different thicknesses. If the thickness tolerance of the material is too large, it will not only directly affect the stamping The quality of the parts may also cause damage to the mold or press. 2. The material of precision stamping parts has high surface quality: the surface of the stamping material is clean and flat, free of oxide scale, cracks, rust spots, scratches, delamination and other defects. The material with good surface condition is not easy to break during processing, and it is not easy to scratch the mold, and the surface quality of the obtained stamping parts is also good. 3. Precision stamping materials should have good plasticity: stamping materials should have higher elongation and section shrinkage, lower yield and higher tensile strength, higher plasticity, large deformation, and It is conducive to the stability of the stamping process and the uniformity of deformation, and improves the forming dimensional accuracy of precision stamping parts.