Hebei stamping parts, a powerful stamping factory with high production experience and strong technology

Hebei stamping parts, as a technology industry, requires us to continuously use technology to improve quality, increase production capacity, and increase qualifications. Several problems in the production process, Xiaoshuo will take you to understand: 1. The product materials are divided into two types: coil and sheet. Some coils need to be slit to the width of the strip again after arriving at the factory. When slitting, the size is negative tolerance (minus 0.5mm), and the inner diameter of the coil must be in line with the size of the feeding frame, avoiding too large or too small and too heavy. 2. When the mold is processed, the pin hole of the line cut is usually used as the number of touches After the CNC is programmed, the operator needs to give the coordinates of the two holes to the programmer. After the programmer finds the angle, the program is placed at an angle and then processed. Usually when the template is processed for the first time, there is no need to find the angle for edge processing. 3. The concept of fine blanking is to leave no blanking gap (or only 0.5%). Generally, the blanking gap is 10% of the material thickness. The thicker the material, the greater the gap ratio. Hardware, 15 years of ingenuity focused on Hebei stamping parts, 20000+ sets of mold customization processing and production experience, monthly 100+ sets of mold processing capacity, 3 million punching production capacity per day, stamping accuracy up to 0.01mm, 16 quality inspection layers are strict check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!