High-quality flat washer manufacturer, raw materials adopt national standard original factory + 15-year manufacturer with silk-like stamping accuracy

The technicians of high-quality flat washer manufacturers have said that there are 9 standards for flat washers in my country. From 2000 to 2002, GB/T97.3-2000, GB/T5286-2001, GB/T95-2002, GB/T96 were approved and issued. .1-2002, GB/T96.2-2002, GB/T97.1-2002, GB/T97.2-2002, GB/T97.4-2002 and GB/T5287-2002 and other flat washer standards. According to the performance level of flat washers, Xiaoshuo recommends the use of materials: ST12, ST13 and Q235, Q215, Q195, etc. can be used for 100HV grades, and the surface hardness can reach about 110HV; for 140HV grades, 08F, 08Al and 10, 10F can be selected Etc., the surface hardness can reach about 140HV; for 200HV and 300HV grades, 45, 50, 60, 70 steel or 65Mn steel should be selected, and it can reach 200-300HV and 300-400HV technical requirements through heat treatment, quenching and tempering. According to the standard, flat washers of 100HV and 140HV grades can be made of low carbon steel. Most companies generally use Baosteel materials when selecting materials, which is convenient for cold stamping. Hardware. 15 years of focus on high-quality flat washer manufacturers, 5,000 square meters production workshop, hundreds of processing and production equipment, more than 20 Ru0026D and design engineers, flat washer daily production capacity of 3 million strokes, precision up to 0.01mm, 16 quality inspection layers are strictly controlled . Choose a flat washer manufacturer, choose, choose rest assured!