Home improvement season, hardware installation is exquisite

It’s the decoration season again, and the decoration of the new house is starting. Sometimes it’s because of the carelessness of the decoration workers. Sometimes it is to save costs. Some hardware will be installed by themselves. If you don’t usually fiddle with these items, you must pay attention to the installation methods. , Don’t install it indiscriminately, because the small hardware is connected with carefully selected furniture. The installation steps of all kinds of hardware are not the most complete, but I just hope it can be helpful.

　　1, paint coating

　　 Woodworking hardware installation Most wood products need to consider the issue of paint. Therefore, the installation time of the hardware needs to consider the connection with the painter's construction. This needs to be considered from two aspects: first, the installation time of the hardware cannot be arranged too early, otherwise the painter will need to consider the protection of the hardware too much during the construction; second, when installing the hardware, Be careful not to damage the work done by the painter. Therefore, the normal construction is often arranged like this: For the hardware that needs to be drilled, it is basically completed before the painter's construction or the main process (such as the unlocking hole before the door lock installation is basically at this stage It is better to arrange the drilling holes of the handle at this stage). After the painter finishes the {TodayHot} job, the carpenter will carry out the installation work.

　　2. Installation of electrician lamps and switch socket panels

　　 The installation of lamps and switch socket panels should be carried out after the painting or wallpapering of the wall is completed. There has been such an example: in order to save personnel expenses during construction, a company had an electrician install a switch socket prematurely in the process arrangement. When using a wallpaper knife to cut the opening of the socket panel, the panel was accidentally scratched.

　　3. Installation of sanitary ware and bathroom hardware

　　 As the overall management level of the home improvement industry is still very low, the quality of the workers on the construction site is generally poor. Therefore, in some construction sites, too many installed bathtubs were first used by construction workers. In recent years, there have been many complaints in this regard. Therefore, it is recommended that consumers, unless forced to do so, before the acceptance of the project and most construction workers have not been evacuated from the site, it is best not to install sanitary ware. Otherwise, it is very likely that you will find hair left after bathing in your brand new bathtub.