How about the quality of the hardware processing of Dangshan stamping parts in Xiaoshan

In modern life, we are all inseparable from stamping hardware, so we must treat quality problems strictly. So how about the processing quality of Xiaoshan Dangshan stamping hardware? The first is the requirements for bending parts: 1. The shape of the bending parts should be as symmetrical as possible, and the bending radius should not be less than the minimum bending radius allowed by the material. 2. The curved side is too short to be easily formed, so the straight part of the curved side should be made H>2δ. If H is required to be very short, you need to leave a proper margin to increase H, and then cut off the added metal after bending. 3. When bending parts with holes, in order to avoid the deformation of the holes. The second is the requirements for deep-drawn parts: 1. The shape of the deep-drawn parts should be simple and symmetrical, and the depth should not be too large. In order to minimize the number of deep drawing, easy to shape. 2. The fillet radius of the deep drawing part does not increase the process procedure. Otherwise, it will inevitably increase the number of deep drawing and shaping work, but also increase the number of molds, and it is easy to produce waste and increase costs. Xiaoshan Dangshan stamping parts hardware processing factory has focused on precision stamping for 15 years, and the stamping precision has reached ±0.01mm. Its strength and achievements have been trusted and recognized by customers. If there is a need for stamping, Hardware looks forward to your call to help you solve your problems: