How do stamping parts manufacturers solve the problem of stamping die waste-hardware

In the production process of stamping parts manufacturers, they often encounter the problem of waste generation in stamping dies, which results in the blockage of the dies and the consequences of crushing the surface of the stamping parts. How to solve these problems? Xiaoshuo sorted out a few points for your reference: 1. The waste material jumps into the hole (1) The length of the punch is not enough, according to the punch edge, cut into the die with a thickness of 1mm to replace the punch (2) The die gap is too large, cut into the die Reduce the gap or use a drape machine to reduce the gap (3) The punch or template is not demagnetized, and the punch or template is demagnetized with a demagnetizer. 2. The hole is blocked by waste (1) The blanking hole is small or the blanking hole is offset. Large blanking hole makes blanking smooth (2) The blanking hole is chamfered, and the blanking hole is enlarged to remove the chamfer. (3) The knife edge is not taper, the line cutting taper or the reverse side expansion hole reduces the straight wall length (4 ) The straight wall of the knife edge is too long. Drilling on the reverse side shortens the straight wall of the knife edge. Hundreds of processing and production equipment, with a daily production capacity of 3 million strokes. With the concept of customer demand results as work results, it has served thousands of companies and solved many customers' time problems, accuracy problems, and quality problems for stamping parts. Choose, choose rest assured!