How does a stamping factory achieve burr-free stamping-hardware

In the cutting and stamping process of the stamping processing plant, the burr is the depositor. During the separation of the stamping process, the stamping tread, the shear surface, the fault plane and the burr will be generated. How to control and reduce burrs in the production process? In the production of the stamping processing plant, if the punch and the die are broken, the burr will not occur, but the fracture occurs at the top of the punch and the die slightly to the side, so the burr is generated. However, you don't have to worry so much when the punch and die are in a good state of force. As the force tip of the punch and die wears, the position where the fracture occurs will shift, which will cause the burr to become larger. The burr can be solved and improved by expanding and improving the relationship between the punch and the die, and the 'flat pressing method'. Hardware, 15 years of craftsmanship focused on stamping processing plant, 5000 square meters area, 20000+ sets of mold customization, rich experience in production, China Mobile, Amazon, Hitachi partners. Choose, choose rest assured!