How does a stamping factory solve the skipping waste generated during punching and cutting-hardware

In the production of the stamping processing plant, when the stamping die is punched and cut, due to various reasons, it is easy to cause the phenomenon of scrap on the die, which affects the appearance of the product and the structure of the product. Xiaoshuo sorted out a few reasons for your friends to analyze: Reason analysis: 1>. Die gap is too large 2>. The punch is too magnetic 3>. The die edge is worn and the edge is bright 4>. The punch enters The effective stroke of the die is too short to improve the countermeasures: 1>. Adjust the gap of the die, re-cut into the block 2>. Demagnetize the convex and concave die 3>. Use the coating machine to roughen the edge of the die 4>. Lengthen the work of the punch Length 1. In addition, after lengthening the punch, grind a notch to form an R angle or chamfer the edge of the working surface. 2. For larger punches, you can add ejector pins or ball screw hardware in the punch. 15 years of ingenuity focused on stamping processing plants, the factory area is 5000 square meters, more than 20 R u0026 D design engineers, product accuracy can reach 0.01MM. Quickly solve your urgent problems about stamping parts, product accuracy problems, and production quality problems!