How does a stamping part processing factory design a set of high-quality stamping dies-hardware

The precision of stamping products is firstly determined by the reasonable design of the mold. Only reasonable design and processing precision can produce a qualified and good product. So how does a stamping processing plant make a good set of molds? 1. First evaluate the pressing, unloading, ejecting and pushing methods, and plan the corresponding pressing plates, unloading plates, and pushing blocks. 2. Mold base planning: including the planning of upper and lower mold bases and guiding methods, and standard mold bases can also be selected. 3. On the basis of the completion of the above operations, the mold operation diagram is made proportionally. First use the double-dotted line to make the blank, and then make the working parts, then make the positioning and distance parts, use the connecting parts to connect the above parts, and then make the pressing and unloading parts in the appropriate position. According to the specific conditions of the mold, the above sequence can also be adjusted appropriately. 4. The operation drawing should indicate the outline dimensions of the mold, the closed height of the mold, the cooperation scale, and the method of cooperation type stamping mold planning and process mold planning. The job map should indicate the requirements of mold making precision and technical conditions. The job map should be made according to the national drawing standards, with a standardized title bar and a detailed list of names. If it is a blanking die, make a layout drawing on the upper left corner of the job drawing. 5. Calculate the mold pressure center and check whether the pressure center coincides with the center line of the mold handle. If they do not coincide, make corresponding corrections to the mold results. 6. Calculate the punching force, and finally select the stamping equipment, and check the relevant dimensions of the die and stamping equipment (closed height, work surface, die handle device dimensions, etc.). With 15 years of experience in hardware, the core culture of the results of your work is the result of your needs, and the concept of honesty and trustworthiness has won the recognition and trust of many customers. As a long-standing stamping parts processing factory, people have been working hard in the industry to improve themselves and create more value for customers!