How does the mesh punching manufacturer maintain the microporous punching die?

Dongguan is a mesh punching manufacturer, mainly processing stainless steel small holes, stainless steel fine holes, stainless steel micro holes and other mesh punching processing. Stamping processing is a processing method used by mesh manufacturers. The molds used for stamping processing should be maintained and maintained, so that the equipment can maintain the best performance status and prolong the service life to ensure the normal production. How does the mesh punching manufacturer maintain the punching model? Regular inspections need to be carried out by mold maintenance, upper and lower mold personnel for regular maintenance and inspection. After punching, the mold is cleaned by electrolytic ultrasonic, which can prevent rust. Daily inspection and maintenance, check the production status, confirm whether there is any defect in the mesh and whether the mold is related; when the machine is off, the mold must be fully inspected and rust-proof treatment: wipe dry the cavity, core, ejector mechanism and line Place the water in the parts and spray the mold anti-rust agent or apply butter. After leaving the machine, the mold should be placed in the designated place and recorded. The mesh stamping processing plant also conducts inspections every quarter: mainly to clean and maintain the punching dies that have not been used for more than two months. Open the mold and check whether there is anti-rust inside. If there is, the anti-rust treatment must be performed again. The mold that has not been used for a long time must be greased, put it back in place and make a record.