How to ensure the safety of precision stamping parts

1. First of all, the structure should ensure the convenience of feeding, ordering, discharging, and cleaning up waste as much as possible.　　2. It should be convenient and safe to assemble and disassemble the mold parts to avoid the possibility of pinching or cutting hands; the mold should be easy to disassemble and store. 3. For the processing of small precision stamping parts, it is strictly forbidden for the operator's fingers, wrists or other parts of the body to extend into the mold area; 　　 4. For the processing of large precision stamping parts, if the operator must enter the mold by hand, Minimize the range of entering the mold as much as possible, shorten the time that a certain part of the body stays in the mold as much as possible, and specify the range of the mold danger zone, and be equipped with necessary protective measures and devices. 5. For the processing of large precision stamping parts, if the operator must manually enter the mold to work, the scope of the mold should be reduced as much as possible, and the time that a certain part of the body stays in the mold should be as short as possible, and the danger zone of the mold should be clearly defined. , Equipped with necessary protective measures and devices.　　 6. Excessive and difficult actions are not allowed during operation. Should try to avoid strong noise and vibration during stamping processing.　　7. It is not allowed to produce waste or workpiece missiles in the process of processing precision stamping parts, which will affect the attention of the operator or even damage the operator.　　 8. Avoid cuts from burrs on precision stamping parts. The operator is not allowed to have too much movement range during the punching operation, and avoid the posture that makes the body lose stability.