How to improve the efficiency of SMT11% patch from packaging for Dongguan shield manufacturers

Many friends of Dongguan shielding cover manufacturers have said that the packaging of shielding covers is also a very knowledgeable technology. If the packaging method is unreasonable, it will not only affect the quality of the shielding cover, but also affect the efficiency of the placement factory. Xiaoshuo will work with you to understand: 1. Most large-sized shields are usually packaged in custom-made trays. In the design of the pallets, they should overlap each other and support each other, so that after they bear the weight, gravity will not be pressed on the shielding cover to prevent deformation due to extrusion. 2. For some smaller shielding covers, trays can also be used for packaging. 3. In recent years, with the continuous development of the industry, most manufacturers have adopted carrier tape packaging for some smaller shielding covers. Although the cost is slightly more expensive, the deformation of the shielding cover caused by packaging and transportation is effectively controlled. At the same time, it also greatly improves the efficiency of the placement factory during production. Hardware, 15 years of focus on Dongguan shielding cover manufacturer, 2 days for proofing, 4 days for mold production, monthly processing capacity of 100+ sets of molds, daily production capacity of 3 million punching times, 16 quality inspection layers are strictly controlled. The production control of the shielding cover is within 0.07mm flatness. Each product will be customized with a suitable pallet and carrier belt packaging. Not only the quality of the products is fundamentally guaranteed, but also the production efficiency of the cooperating placement factories has increased by 11%.