How to install the cage nut?

The installation of the cage nut is actually relatively simple, as long as it is pressed in, it is fixed on the board by the clamping positions on both sides.

The first installation method

First look at the car license plate mounting hole, whether there is a fixed iron plate, if there is, it is relatively simple, the installation steps are as follows:

Sleeve something in the shape of a small bowl on the screw with the mouth of the bowl facing outwards (toward yourself), then put on a gasket, fix the license plate on the bumper, and screw in the screw. In the last step, just press the nut on the small bowl!

If there is no fixed iron sheet on the mounting hole without the license plate, a cage nut is needed.

The second installation method (Guide: Teach you to understand the head mark of aviation fasteners)

The first step is to buckle one of the clips of the cage nut on the mounting plate on the side of the square hole; then take the hook, pass the operating part of the hook through the square hole, and then buckle the other clip of the cage nut. Pass the foot through the square hole and buckle with the mounting plate on the other side of the square hole; finally, remove the hook and the cage nut is installed! Is it very convenient and simple?

Caution for installation of cage nut

1. The bends and edges of the cage nut should be free of burrs and keep the surface smooth;

2. The cage nut is clamped on the plate through both sides of the spring clamp.

More related stamping fixture industry news: