How to maintain and maintain stamping parts processing equipment

The maintenance and maintenance of stamping parts processing equipment is a daily work that must be carried out for the normal operation of the mechanical equipment and prolong the service life. 1. Daily maintenance: It is the maintenance work of stamping parts processing equipment that operators must carry out every shift, which includes: cleaning, refueling, adjustment, replacement of individual parts, checking for lubrication, abnormal noise, oil leakage, safety, and damage. Routine maintenance is carried out in conjunction with routine inspections, which is a way of equipment maintenance that does not take up man-hours alone. 2. An indirect preventive maintenance form that is based on regular inspections and supplemented by maintenance inspections. Its main work content is: inspection, cleaning, adjustment of various operations, parts of the transmission mechanism; inspection of the oil pump, dredging the oil circuit, checking the oil quality and quantity of the fuel tank; cleaning or replacing the stained felt and oil line, and removing the burrs on each movable surface; Check and adjust all indicating instruments and safety protection devices; if hidden troubles and abnormalities are found, they must be eliminated, and leakage should be eliminated. After secondary maintenance, the equipment meets the requirements: clean and bright appearance; unobstructed oil passage and bright and clean oil windows; flexible operation and normal operation; safety protection, complete and reliable indicating instruments. The maintenance personnel should keep a record of the main contents of the maintenance, hidden dangers, abnormalities discovered and eliminated during the maintenance process, the results of the trial operation, the accuracy of the trial production parts, the operation performance, etc., as well as the existing problems. The secondary maintenance is mainly based on operators, and professional maintenance personnel cooperate and guide. 3. Three-level maintenance is an overhaul form that mainly maintains the technical status of stamping parts processing equipment. The workload is between repairs and minor repairs, and part of the repairs to be completed. It is mainly aimed at the wear and tear of equipment vulnerable parts. Damaged to be repaired or replaced. The third-level maintenance must complete all the work of the second-level maintenance, and also requires all the lubrication parts to be cleaned, combined with the oil change cycle to check the lubricating oil quality, and clean and change the oil. Check the dynamic technical status and main accuracy of the equipment (noise, vibration, temperature rise, oil pressure, ripple, surface roughness, etc.), adjust the installation level, replace or repair parts, scrape and polish the damaged movable rail surface, and repair the adjustment accuracy. Deteriorated parts, check machine-mounted instruments, repair safety devices, clean or replace motor bearings, measure insulation resistance, etc. After the three-level maintenance, the accuracy and performance are required to meet the process requirements, and there is no oil leakage, air leakage, electric leakage, and the sound, vibration, pressure, temperature rise, etc. meet the standards. Before and after the secondary maintenance, the dynamic and static technical conditions of the equipment should be measured, and the maintenance records should be carefully made. The third-level maintenance is dominated by equipment maintenance personnel, with operators participating. Recommended article: Punching die, a decisive tool in the production of stamping parts. Previous article: Talking about the necessity of metal tensile test