How to maintain the metal stamping die after use?

Generally, the metal stamping parts molds are only used. How do the metal stamping processing manufacturers maintain the metal stamping parts molds? 1. After the stamping parts molds are used, the molds must be removed from the press according to the operating procedures correctly, and they must not be dismantled. Unwanted unloading to avoid damage to the mold; 2. After disassembly, the mold should be wiped clean and oiled to prevent rust; 3. The inspection and maintenance of the stamping part mold after use mainly include: cleaning the mounting surface of the upper and lower mounting templates, Wipe the mold cavity surface, remove waste, apply oil to the guide slide and working surface, check whether the mold cavity surface is damaged, whether the guide pin and guide sleeve is loose, check whether the pressing material, the return mechanism and the cutting edge are intact, and check the positioning of the stamping parts Whether it is accurate and reliable, check whether the visible fasteners are loose, fasten the loose parts, check whether there are cracks in the visible parts, etc.; 4. After all the inspections are completed, the stamping parts can be moulded after confirmation by the production manager. Put the hardware in the mold frame, from the quality inspection of the stamping parts processing raw materials, to the mold design, processing, assembly, to the first product, and mass production. It is a one-to-one customized service to ensure that every small metal stamping part is your product Matching, 15 years of hardware stamping experience, a processing team of more than 20 people, can produce samples in 2 days, and ship in 3 days. Can save your product listing time.