How to maintain the mold in the stamping parts processing plant

If a metal stamping processing plant wants to extend the service life of the die, it needs to maintain the stamping die regularly. Thorough repair and maintenance of the mold can ensure the production efficiency and quality of future metal stamping products. Precision-Focus on precision metal stamping parts for more than 10 years, and have accumulated rich experience in processing customization. So, how should the stamping factory maintain the mold? Next, Precision will introduce the content of mold maintenance. 1. Clean the mold cavity, oil and waste on the mold surface, and spray anti-rust oil after cleaning; 2. Clean the grease on the guide post, guide sleeve, guide plate, blank holder and guide rail, and add fresh and clean lubricant ; 3. Check the condition of the fastening and positioning components, replace the damaged components, and then if there are loose parts that need to be fastened; 4. Check the drawings, whether the forming and pressing surfaces are worn, and then repair, weld and polish the worn parts , Polishing and other treatments; 5. Check the pressing and unloading parts, and repair and replace damaged parts; 6. Check the guiding device and the inclined wedge device to repair and replace the worn and broken parts; 7. Check the punch and The wear state of the cutting edge, repair and replace the worn area; 8. Check the template, whether the mold is worn, deformed, whether the parts are worn and deformed, for repair and replacement; 9. Check the gap between the molds and the wear of the ridge , There is wear and tear that requires maintenance. [Related recommendation] Learn more: What are the methods for polishing the surface of stainless steel? Learn more: Manufacturing characteristics of automotive stamping parts molds Learn more: Points to note in the design of continuous stamping dies