How to maintain the press machine for processing metal stamping parts?

How does the stamping parts processing factory maintain the presses for processing hardware stamping parts? Let’s take a look now; the maintenance before the press processing of the metal stamping equipment; 1. Check whether the oil sump, oil level, and oil standard meet the prescribed standards. If not, replenish the oil in time; 2. Check whether the button is flexible, yes There is no jamming phenomenon; 3. Check whether the motor grounding wire is loose, falling off or damaged. If there is looseness, pay attention to repair; 4. Check whether the safety protection device is complete and reliable; 5. Check whether the handles are flexible; 6. The tightening is loose Nuts of various parts; maintenance in the processing of metal stamping equipment; 1. Start the hydraulic pump, check whether the hydraulic pump works well, and whether the sealing parts and pipelines are blocked or leaked; 2. Check the limit switch and bumper Whether the positioning, etc. are normal; 3. Pay attention to the temperature rise of each component and the sound abnormality at any time; the hardware stamping parts processing equipment is maintained after processing; 1. Check and clean up all parts; 2. The operating handles, switches, etc. must be in the neutral position; 3. Check, clean up the work area, etc.; Recommended article: What technical requirements should the quality of stamping parts meet? Previous post:Maintenance essentials for punching and concave molds in stamping parts processing plants