How to make circular stampings

Stamping parts manufacturers can process and produce a variety of complex and precise stamping products, including round stamping parts, special-shaped stamping parts, tapered stamping parts, rectangular stamping parts, and so on. In this article, we are going to introduce how to make round stamping parts and the characteristics of round stamping parts. 1. Need to form a round stamping part; 2. Put the formed round stamping part into a blanking die with two holes for stamping processing. During the stamping process, the first positioning of the strip body is positioned by the two inclined sides of the parallelogram length, and then the positioning of the strip body is positioned by the hole edge of the circular stamping part after the blanking; 3. If it is to improve For processing efficiency, two rows of circular stamping parts can be arranged in the strip, and the two rows of circular stamping parts are arranged staggered; when the stamping parts are processed, the positioning of the strip is positioned on the four sides of the rectangular strip; although this method Although the processing efficiency is improved, the utilization rate of the stamping parts is not high, and the processing cost is relatively increased; 4. The horizontal section of the formed circular stamping parts is a parallelogram, and the two sides of the parallelogram length direction are inclined. The circular stamping parts made by this strip can improve the material utilization rate and reduce the processing cost. At the same time, during the stamping process, the strip must be positioned once every time it is punched, and the quality of the round stamping parts produced will be better. [Related recommendation] Learn more: What are the methods for polishing the surface of stainless steel? Learn more: Manufacturing characteristics of automotive stamping parts molds Learn more: Points to note in the design of continuous stamping dies