How to produce high-quality drawing stamping parts

With the development of society, stamping products have developed into various fields, and there are also shadows of stamping parts in our daily lives. There are many kinds of stamping products, which are used in various industries. Briefly talk about drawing stamping parts; drawing stamping parts are a stamping process in which materials are stretched and formed. As one of the main stamping processes, drawing has been widely used in various industries. The drawing process can be used to manufacture cylindrical shapes. , Rectangular, trapezoidal, spherical, conical and other irregular thin-walled stamping parts, if combined with other stamping processes, more complicated parts can be produced; the service life of stretched stamping parts is consistent with the reasonable use of mold equipment, The production of high-quality stamping parts, good heat treatment effect and the correct choice of punching equipment are related. The following aspects should be paid attention to when processing drawing stamping parts; the mold for processing drawing stamping parts should be strictly inspected before installation and use, to remove internal dirt, and check whether the guide sleeve and the mold are well lubricated. In the die for processing drawing and stamping parts, the punch and die should be stopped when the edge of the die is worn out, and sharpened in time, otherwise the wear of the die edge will be rapidly expanded. Increase the wear of the mold, reduce the quality of the stamping parts and damage the life of the mold; to ensure the service life of the stamping and stretching parts, the spring of the mold should be replaced regularly to prevent the quality of the stretching stamping parts caused by the damage of the spring for too long; In order to ensure the quality of drawing stamping parts, reduce costs, and extend the life of the punching die, the mold must be used correctly and maintained reasonably, and the 'three inspections' system for the stamping die must be strictly implemented, that is, the inspection before use, during use, and after use; and Good daily maintenance and repair work; related news: the characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspection, the advantages of metal stamping parts introduce the advantages, procedures and characteristics of stamping parts