How to reasonably determine the stamping direction of deep-drawn stamping parts?

The stamping parts processing plant must reasonably determine the stamping direction of the deep-drawn stamping parts, so that satisfactory deep-drawn stamping parts can be drawn. How to make a reasonable conclusion? There are mainly several requirements; 1. The punch can enter the concave mold. The shape of the lower right side of the concave mold protrudes outwards, and the size of the concave mold opening is protruding, so that the punch cannot enter the concave mold. This stretching direction cannot be stretched. The stretching direction has been changed so that the punch can enter Concave mold. 2. Make the convex mold touch the blank with a large area. The larger the touch surface, the smaller the angle between the touch surface and the horizontal plane. The rougher is less likely to have some stress overload and cause the parts to break. The function of attaching the mold is improved during stretching, and the shape of the punch is simply obtained, which is conducive to improving the degree of deformation of the stamping parts. 3. The feeding resistance of the pressing surface should be uniform and reliable. Uniform stretching is an important condition for the uniform and reliable feeding resistance of each pressing surface. The uniformity of the feed resistance on the blanking surface is important for the stretch stamping parts to be free from wrinkles and cracks. Recommended article: What are the basic requirements for the design of stamping parts processing? Previous: Stamping parts processing plant talk about the rules of mold maintenance