How to reduce the cost of stamping die

Precision—Focusing on customized production of precision stamping parts for a few hours, accumulated rich experience, and the products are widely sold at home and abroad. The cost of precision stamping parts is a very important point for stamping processing plants. The mold cost has a great influence on the order in the early stage, so reducing the cost is particularly important. Today, we will mainly analyze some elements that harm the cost of molds. 1. Effective product design plan: I believe that many people cannot easily approve of our company's point of view. Whether the product design plan is effective, and how could it be a major factor that harms the cost of the mold. But everyone thinks about it carefully. If the product design plan is not scientific, it will be a disaster for the mold company. Our company has been engaged in mold processing for many years. Such things have gone through a lot. Sometimes in order to better complete a demolding of the product, and the product technical engineer and the mold interior designer do not have very good communication, the cost of the mold is reduced. Will be doubled. Therefore, a product interior designer should master as much knowledge of the mold as possible, so that the product from the design plan is as suitable as possible for the development of the mold project, without having to increase the difficulty factor and cost of mold making for no reason. Under the premise of considering the installation of the whole vehicle, maintaining good communication with the mold unit is an effective countermeasure to reduce the cost of molds. Therefore, if the product design plan is not scientific, it will immediately increase the mold cost. 2. Product engineering changes: mold companies often encounter such a situation. In a new project, the mold has just been designed and the mold blank has just been bought home, and the customer's design change notice will come, if it is a small change , It doesn’t harm the overall structure of the mold, so it doesn’t matter. Sometimes the situation is serious. Due to the change of the product appearance, the organization of the mold should be improved, and even the mold embryo needs to be purchased again. This cost increases and becomes bigger. Therefore, engineering changes should be avoided as much as possible. 3. Is the mold design plan sound: In general mold companies, there is no doubt that there are old and experienced interior designers in the design department, and there are also young technical engineers who have just left colleges. It is unlikely that you will be young The technical engineers of the company can design high-quality molds individually when they first come to the company. They are mold technical engineers with rich and colorful work experience. If the mold structure is self-proclaimed, it is unlikely to be perfect, and there is no doubt that it will appear. Some key points that are not considered An important and effective way is group review. It must go through several group reviews of the mold structure. I believe everyone has a consensus on this issue. There are many simulation methods, such as mold flow analysis, dynamic changes of mold structure, and three-d check analysis of products and design schemes, which can greatly reduce the cost increase caused by unscientific mold design schemes. [Related recommendation] Learn more: Precautions for designing continuous stamping die (2) Learn more: 6 precautions for designing continuous stamping die Learn more: Analysis of the causes of stamping die burst