How to remove the burrs from the external processing of Xiaolan hardware stamping parts?

In the production of metal stamping parts, burrs usually appear, so how to deal with this situation? Xiaolan hardware stamping parts outsourcing processing [hardware] tell you. Hardware removal of metal stamping parts 1: There are tools to remove burrs from metal stamping parts 1. Hole: Use a chamfering knife or the front end of a drill with a larger diameter to remove burrs from the holes of the metal stamping parts. 2. Edge: Use files, whetstone, sandpaper, whetstone. 3. Welding slag: There are vibration slag removal tools can also remove brittle burrs. 4. Outer diameter: In the metal stamping process, the angle is guided by a lathe. 2. Manually remove the burrs on the metal stamping parts 1. Deburring by electrochemical method: If the equipment is self-made, the cost is not high, it is economical, efficient and used. 2. Heat-treated parts can also be deburred by shot blasting, and surface stress can also be eliminated. 3. It has better deburring effect and high efficiency with an air gun equipped with various shapes of gun tips. 4. Vibration grinding to remove burrs (gear burrs), with high efficiency and good quality. Xiaolan hardware stamping parts outsourcing processing [Hardware] 15 years of focusing on precision metal stamping, the precision of metal stamping parts reaches ±0.01mm, leading 95% of the same manufacturers. Technology, reputation and quality have always been loved and trusted by customers, and it is the first choice for cooperation with 15,000 companies in the world. If you have stamping needs, Hardware looks forward to your call: (same number on WeChat)