How to solve the phenomenon of turning and distortion of precision metal stamping parts? 15 years of ingenuity manufacturers tell you

With the advancement of society driving the refinement of industrial electronics, various industries have higher and higher requirements for precision metal stamping parts, including the shape of stamping parts. In the process of punching its shape, it is easy to produce material turning and distortion, which affects the quality of the product. Reasons and solutions for turning and twisting of precision hardware: (1). Reasonable mold design. In the progressive die, the arrangement of the blanking sequence may affect the forming accuracy of the stamping parts. For the blanking of small parts of stamping parts, generally a larger area of u200bu200bpunching is arranged first, and then a smaller area of u200bu200bpunching is arranged to reduce the impact of the punching force on the forming of the stamping part. (2). Hold down the material. Overcome the traditional mold design structure, open a material-containing gap on the discharge plate (that is, when the mold is closed, the discharge plate is attached to the concave mold, and the gap between the discharge plate and the concave mold where the material is contained is the material thickness t-0.03 ~0.05mm). In this way, the unloading plate moves smoothly during stamping, and the material can be compressed. The key forming part, the unloading plate must be made into a block-type structure to facilitate the solution of the wear (compression) loss of the pressing part of the unloading plate caused by long-term stamping, and the material cannot be compressed. (3). Add strong pressure function. That is to increase the size of the press part of the unloading insert (normal unloading insert thickness H+0.03mm) to increase the pressure on the material on the side of the die, so as to prevent the stamping part from turning over and twisting during punching. (4). The end of the punch edge is trimmed with a bevel or arc. This is an effective way to reduce cushioning power. By reducing the buffer cutting force, the tensile force on the side material of the die can be reduced, so as to achieve the effect of suppressing the turning and twisting of the stamping parts. (5). In daily mold production, care should be taken to maintain the sharpness of punching convex and concave die cutting edges. When the punching edge is worn, the tensile stress on the material will increase, and the tendency of the stamping part to turn over and twist becomes greater. (6). Unreasonable or uneven blanking clearance is also the cause of turning over and twisting of stamping parts, which needs to be overcome. Hardware Co., Ltd. has focused on ingenuity stamping for 15 years. The precision of precision metal stamping parts has reached ±0.01mm + strict quality control process. Samples in 2 days, shipments in 3 days, and molds in 4 days have won the recognition and trust of many customers. It has also reached a pleasant and long-term cooperation with a number of listed companies in various industries. Is your trusted choice for consultation telephone: