How to solve the problem of defective products in the processing of metal stamping parts

With the further expansion of the metal stamping parts market, while we continue to increase production, we also need to ensure product quality. In the actual production work, we found that metal stamping parts are prone to some undesirable phenomena during the processing process, such as distortion, wrinkling and other problems. Therefore, it is necessary for us to take some measures to reduce the occurrence of such problems. So, what are the active and effective measures? We have summed up from a large amount of production experience and believe that we can start from three aspects to solve the problem of defective products of metal stamping parts. First of all, strictly control the materials. Choosing the right materials is the first step to obtain high-quality products, and it is also a very critical step. Therefore, before the raw materials are put into storage, strict inspections should be carried out in accordance with the standards. If necessary, it is best to use some instruments for laboratory inspections to ensure the quality of the materials. Second, strictly control every aspect of production. This part of the work includes many aspects, the main contents are: 1. Operate strictly in accordance with the required production standards, and must strictly abide by every production link; 2. All used in the production process of stamping parts The equipment must be guaranteed to be under normal working conditions; 3. Establish a strict production management system. For example, for the transfer of workpieces and blanks, appropriate workstations must be used to avoid affecting the quality of production. In addition to the above aspects, we also need to ensure the cleanliness of the entire production process, to ensure that there are no impurities inside and outside the equipment used, especially the cleaning in the mold; in addition, we should also ensure that the processed stamping products Arrange neatly. Finally, in the production process, a strict inspection system needs to be established and implemented in accordance with this system. To sum up, in order to avoid the problem of defective products in stamping parts as much as possible, we should start from the above aspects, and hope that these contents can help everyone. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections