How to solve the problem of easy breakage of punches in stamping factories-hardware

The punch of the stamping die suddenly breaks due to various reasons when the stamping processing plant is working overtime and rushing for the goods, which is an urgent matter. It’s okay to have a spare punch, if not, it needs to be reprocessed, which wastes time and labor. How to control the easy breakage of punches in stamping factories? 1>. Increase the inclination or diameter of the blanking hole under the die, and use a demagnetizer to demagnetize the die. 2>. Reduce the working part, generally within 4mm. 3>. Grind the punch or die, adjust the gap ( (Depending on the size) 4>. Production line personnel ensure that the material is not stressed 5>. Replace the punch, check during maintenance 6>. Check the spring, replace the spring and the punch 7>. Modify the clearance of the splint or stripper plate (Modify depending on the position of the die) Hardware, 5000 square meters area, 15 years of rich experience in stamping processing factory, 20000+ sets of mold customization and production. With a daily production capacity of 3 million, 16 quality inspections are strictly controlled, and customer demand results are the core concept of work results. Choose, choose rest assured!