How to solve the problem of thinning during bending in a metal stamping factory-hardware

In the stamping production process of a metal stamping factory, the metal raw materials will be bent in the mold, and after the bending, the raw materials will become thinner. For example, the raw material of 1.0MM will become 0.85 after bending. Correspondingly, it will have a certain impact on customers in the process of making. So how does a metal stamping factory solve this problem? If the bending radius is too small relative to the plate thickness (r/t>3 right-angle bending), generally increase the bending radius; multi-angle bending makes the bending part thinner and larger, in order to reduce the thinning, try to use single-angle multi-process bending method; When the sharp-angled punch is used, the punch enters the concave mold too deeply, so that the thickness of the bent part is significantly reduced. Hardware, 15 years of experience in hardware stamping factory, custom and production of 20,000+ sets of hardware stamping dies, daily production capacity of 3 million punches, product accuracy up to 0.01MM, and 16 quality inspection procedures are strictly controlled. Quickly solve your time requirements, precision requirements, and quality requirements!