If the screws are not installed well, the tires will run everywhere: evaluation of the special air wrench for screw disassembly and assembly

With economic development, the number of private cars has doubled. As a consumable for automobiles, it is normal to replace tires. What tools do you use when disassembling tires, especially when disassembling bolts, is it always I am sighing that it would be great to have a handy tool, so today I will recommend a bolt disassembly tool for small car tires and other mechanical equipment, wind wrench.

1. Product Appearance

Double-hammer striking structure, high torque; the striking shaft and striking block are all made of high-quality alloy structural steel after quenching treatment, which is particularly strong and wear-resistant; increased gas red, the motor output power is greater; 6-speed speed regulation, forward and third gears reverse Three gears, easy to work; industrial-grade bearings are used. High precision and long service life; the rear exhaust structure is adopted, and the structure is simple and easy to maintain. (Guide: Overview of the mechanical properties of fasteners)

Used for the disassembly and assembly of small car tires and other equipment bolts in the field, aluminum alloy die-casting shell, double hammer structure, forward and reverse conversion to six-speed design, thermal power can be adjusted according to needs, wear-resistant oil-bearing, matching The drive shaft is designed for high-speed selection and does not wear, the rear exhaust muffler structure design, the hand bridge is covered with rubber, the operation is good, and the anti-skid is not easy to use.

Choose a well-fitted sleeve and insert it into the square head of the drive shaft; connect the air tube to the wind-vibrated air inlet; hold the gun handle with the stone hand and insert the sleeve to the bolt that needs to be dismantled or tightened, and the index finger pulls the trigger to start the work.

Notes:

1. It is necessary to add a small amount of Runhan oil to ensure the best effect of the tool;

2. It is strictly forbidden to run with Tao Chu in order to prevent Tao Jian flying out and hurting people;

3. Check the working pressure before use;

4. Properly place and close the air valve after use to avoid accidental start and cause injury;

5. Check and repair in time if abnormalities are found;

6. Regular maintenance.

More related Shenzhen stamping factory industry news: