Importance of first piece inspection of stamping hardware-hardware

The first inspection of stamping hardware in the production process is mainly to prevent products from being out of tolerance, repairing and scrapping in batches. It is a means to control the production process in advance and an important method for product process quality control. An effective and indispensable method to ensure product quality and improve economic efficiency. First article inspection is to discover the factors that affect product quality in the production process as soon as possible, and to prevent batch defects or scrapped first article inspection before entering Formal production is mainly to prevent the occurrence of batches of unqualified products. Long-term practical experience has proved that the first inspection system is an effective measure to detect problems as early as possible and prevent products from being scrapped in batches. Through the first article inspection, it can be found that there are systemic reasons such as severe wear of the tool and fixture or installation and positioning errors, poor accuracy of measuring instruments, misreading of drawings, feeding or formula errors, etc., so that corrective or improvement measures can be taken to prevent batch failures. Qualified products occur. Hardware, 15 years of focusing on stamping hardware, 16 quality inspection processes are strictly for product quality to be strictly checked, and no defective production or outflow is a process that people are constantly improving. Choose, choose to rest assured!