Installation of snap-in geothermal heating floor

1. Gradually heat up after 24 hours of installation, and keep the floor clean and dry before heating up to prevent cracking and distortion of the floor due to excessive heating. 2. When using geothermal heating for the first time or if it has not been turned on for a long time, it should be set to the lowest temperature first, and then slowly increase the temperature, preferably about 1℃ per hour, so that the wooden floor gradually adapts to the temperature increase. If the heating is too fast, it may cause the wooden floor to heat up too fast, resulting in unstable distortion and cracking changes, which will affect the service life of the wooden floor. 3. Do not make fixed decorations or place legless furniture on the geothermally heated wooden floor as much as possible to prevent local heat dissipation from being unsmooth, and the heat is stuffy on the wooden floor, which is easy to cause the floor to be deformed due to uneven heating. Previous post: Introduction to the application industry of metal stamping parts