Introduce the method of removing burrs on metal stamping parts

1. Choose the appropriate tool according to the deburring place of the metal stamping parts 1. Hole: use a chamfering knife or the front end of a drill with a larger diameter; 2. Side: use a file, oilstone, sandpaper, whetstone; 3. Welding slag: There are sensational welding slag removal tools can also remove the more brittle burrs; 4. Outer diameter: use the lathe to conduct the angle during processing; 5. There are also polishing, grinding, sandblasting, depending on the workpiece and product requirements. Second, according to the characteristics of metal stamping parts, the process of removing the burrs of metal stamping parts is determined. If it is a single product, just go to the craft. 1. Deburring by electrochemical method; 2. Deburring by sensational grinding (gear burr), with high power and good quality; 3. Heat-treated parts can also be deburred by shot blasting, which can also eliminate surface stress; 4. Use an air gun Equipped with various shapes of gun tips, the deburring effect is better, and the power is also high. More related information: product/