Introduction to the advantages of metal stamping parts stamping processing

The stamping of metal parts is a metal cold deformation processing method. Therefore, the metal stamping process and mold, stamping equipment and stamping materials constitute the three elements of stamping processing. Only when they are combined can stamping parts be obtained. The advantages of metal parts stamping processing are high productivity, low mold cost, and no need for sheet metal cutting. Compared with the step die used on the multi-station press, the progressive die can save 30% of the cost, but its application is subject to stretching. The limitation of the surface hardening of the strip edge material of depth, guide and transmission is mainly used for simple parts with relatively shallow stretch depth. The mold is the main process equipment for the stamping of hardware parts. The surface quality, dimensional tolerances, productivity and economic benefits of stamping parts have a great relationship with the mold structure and its reasonable design. According to the combination of the hardware stamping process, there is a simple single process. Mold, multi-process continuous mold and compound mold. When formulating the stamping process of the workpiece, the hardware accessories stamping company outlines that the dispersion and concentration of the processing process is a more complex problem, which depends on the batch size, structure shape, quality requirements, process characteristics, etc. of the workpiece. For cars that are usually mass produced For stamping parts, a concentrated process should be adopted as far as possible, and compound or progressive dies should be used for stamping, so as to improve productivity and achieve safe production. Previous post: Processing of metal stamping parts is a requirement for bent parts