Introduction to the installation process of anchor bolts

What should you pay attention to when installing foundation bolts? What is the installation process of foundation bolts? The following provides you with foundation bolt installation instructions for readers' reference. The installation of anchor bolts is generally divided into 4 processes.

　　一. The verticality of anchor bolts

　　 The anchor bolts should be installed vertically without tilting.

　　 2. Laying of anchor bolts

　　 During the installation of the foundation bolts, the secondary grouting of the dead foundation bolts is often encountered, that is, when the foundation is poured, the reserved holes for the foundation bolts are reserved in advance, and the equipment is installed. Install the anchor bolts, and then pour the anchor bolts with concrete or cement mortar.

　　3. Mounting and tightening of anchor bolts (Guide: Briefly describe the corrosion prevention methods of stainless steel screws)

　　4. Make a construction record of the installation of the corresponding anchor bolts

The corresponding construction records should be made in detail during the installation process of the anchor bolts, which truly reflect the type and specifications of the anchor bolts, and provide effective technical data for future maintenance and replacement.

　　 Generally, the pre-embedded parts with higher installation accuracy must be made into a ground cage (it needs to be worn on the pre-embedded steel plate with bolt holes, and installed with nuts for compression. Before pouring, tie the embedded parts to the template After fixing, the installation size of the foot bolt can be guaranteed. If you want to save materials, you can also use steel welding to fix it. After the welding is completed, the geometric dimensions need to be checked. At this point, the installation of the foot bolt is truly completed.

More related Shenzhen stamping factory industry news: