Introduction to the production process and characteristics of scaffolding stamping parts

Scaffolding stamping is a relatively new type of product. Compared with other similar products, it has many advantages, such as not only beautiful appearance, but also better performance in anti-deformation. However, there may be many friends who lack a certain understanding of the product. Therefore, we will introduce some knowledge about scaffolding stampings today, hoping to help. First, let's take a look at its stamping process. In response to this problem, we can describe the two key parts of the scaffold stamping parts. The two key parts are the cover plate and the middle part. For the former, in production, the steel plate is first produced into a blank by a punching machine, and then heated, and then the shape of the cover plate is punched out by the punching machine, cooled and punched, and finally formed. As for the latter, the production process mainly includes: after processing the steel plate into a blank, then punch out the elongated hole according to the requirements, and heat the workpiece, according to the mold to punch out the shape of the middle part; after cooling the workpiece Put it on the inclined table, fine-punch and shape each hole. This stamping process greatly increases the toughness of the scaffold stamping parts, and is not easy to deform, and at the same time, the robustness is also enhanced. Finally, let's talk about the main features of scaffolding stampings. From the production process just now, we can see that after such a stamping process, it has strong resistance to deformation, on the other hand, it also has strong anti-skid performance and corrosion resistance. For users, it can Use longer time. In addition, a new type of bolt is used, so that even if the steel pipe is deformed, it will still maintain good firmness. Therefore, we can see that the scaffolding stamping parts have many advantages. We hope that through the analysis of this article, we can help you understand this product more deeply. In this way, if we need to buy such products in the future, we can make the right choice. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections