Jiangmen Hardware Stamping Factory, talk to you about the inspection standards of stamping dies

In Jiangmen Hardware Stamping Factory, stamping dies are the key to stamping processing. After a set of stamping die is designed, what processes and links need to be carried out? Xiaoshuo understands with you: First of all: When the mold steel plate and accessories are purchased back to the factory, the quality department will check whether the materials and accessories meet the standards according to the mold's stroke life requirements, and only the qualified materials can be arranged for storage and use; After the steel is arranged to open the material, the quality department personnel must check the dimensions of the mold design drawing to ensure that the parts before the mold assembly are good products, so as to ensure the quality of the mold assembly; after the mold assembly is completed, the quality department personnel will It depends on the height of the mold, the stroke of the punching plate, and the important edge of the convex and concave die to see if the qualified product can be punched out. Then analyze the product section to see if the bright band, collapsed band and burrs on the section meet the customer's quality standards, so as to analyze whether the gap between the punch and the die is reasonable! Hardware, 15 years of ingenuity focused on Jiangmen Hardware Stamping Factory, 20000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, 16 quality inspection layers are strict check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!