Jiangsu Qidong stamping processing plant, stamping die maintenance method + 20,000 sets of die manufacturing production experience

In the Jiangsu Qidong stamping processing plant, the various parts on the mold should have sufficient strength and rigidity to prevent damage and deformation during use. The fastening parts should have anti-loose measures to avoid accidental injury to the operator. Then for the overhaul methods of stamping dies, the following Xiaoshuo sorted out a few points, and let everyone take a look: 1. Mould loose: the movement of the punch or die exceeds the unilateral gap. Adjust the combination gap. 2. Die tilt: The straightness of the punch or die is not correct, or there is foreign matter between the templates, which makes the templates unable to be flat. Reorganize or grind correction. 3. Template deformation: The template has insufficient hardness or thickness, or is deformed by external force. Replace with a new template or correct the method of disassembly. 4. Deformation of the mold base: the thickness of the mold base is not enough or the force is uneven, and the straightness of the guide post and the guide sleeve varies. Grinding and correcting or refilling plastic steel or replacing the mold base or equalizing the force. 5. Die interference: Whether the die size and position are correct, whether the upper and lower die positioning is deviated, whether it will loosen after assembly, the punch accuracy is not correct, and the die frame is not correct. 6. Punching and shearing deviation: the punch strength is not enough, the big and small punches are too close, the lateral force is not balanced, and the punch is half-inclined. Strengthen the guiding and protection function of the peeling sloping plate or increase the punch, short the small punch lt increase the heel and heel length and support and guide early, pay attention to the length of the feed. Hardware, 15 years of focus on Jiangsu Qidong stamping processing plant, 20000+ sets of stamping die customization production experience, monthly 100+ sets of mold processing capacity, hundreds of precision processing production equipment, daily production capacity of 3 million punches, silk-like stamping accuracy 0.01mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!