Layout drawing and mold design common sense of stamping parts processing plant-hardware

Generally, before we customize the stamping parts, we will customize the stamping parts prototype according to our product structure and size to meet our own pre-development and testing needs. So how does the stamping parts processing plant lay out the drawings of the template model and the production of the later molds: 1. According to the nature of the stamping parts, calculate the scale of the model to make the model map 2. According to the nature of the model, plan the layout drawing and use the data Rate accounting. To plan a variety of layout plans, select the best plan among them through comparison. Design of stamping die: 1. Determine the die structure method of each process of stamping processing, and make a schematic diagram of the die. 2. Carry out specific structural planning for the specified 1-2 process molds, and make mold operation diagrams. The planning method is as follows: (1) Determine the type of mold: is it a simple mold, a continuous mold or a composite mold. (2) Mold operation parts planning: calculate the convex and concave die edge dimensions and the length of the convex and concave molds, determine the structure of the convex and concave molds and the connection and fixation methods. (3) Determine the location and distance method of the blank, and plan the corresponding positioning and distance parts. Hardware with 20,000+ sets of stamping die customization experience, more than 20 Ru0026D and design engineers, 2 days for proofing, 4 days for mold production. Choose, choose rest assured!