Lock washer manufacturer, regarding the assembly requirements of lock washer + 3.0 stamping parts design system

The anti-loosening washer manufacturer, the anti-loosing washer has the characteristics of simple installation, so more people use it in daily life. The following Xiaoshuo will take you to understand the assembly requirements of the lock washers: 1. Just place the inner helical tooth surfaces of the two washers facing each other and place them between the nut and the connecting material; 2. After the nut is tightened, the lock washer The outer radial convex surface is in an occluding state with the contact surfaces at both ends, and the slope angle of the oblique tooth surface on the inner side of the washer is greater than the thread angle of the bolt; 3. When the bolt is elongated due to mechanical vibration, the nut will follow Rotate loose. Because the outer radial convex surface friction of the lock washer is greater than the friction between the inner helical tooth surfaces. In this state, only the relative displacement between the inner helical tooth surfaces is allowed, and then a certain lifting tension is generated; 4. When the bolt is contracted, the helical tooth surface of the washer will make the nut return to its original position. So as to achieve 100% anti-loosening and tightening effect; 5. The gasket is suitable for a relatively flat and smooth surface; 6. If the connecting material is a non-metallic material, a metal plate can be fixed on the connecting material, so that it can be The lock washer is used; 7. There is no need to use a torque wrench when installing the lock washer; 8. The pneumatic tool can be used when installing or removing the lock washer. Hardware, 15 years of focus on lock washer manufacturer, 5000 square meters production workshop, hundreds of precision processing production equipment, 20000+ sets of precision stamping die customized production experience, daily production capacity of 3 million strokes, stamping accuracy up to 0.01mm, 16 lines The quality inspection is strictly controlled at all levels. It can quickly solve the urgent problem of flat washer time, solve the problem of stamping accuracy, and solve the problem of production quality. Choose, choose to rest assured!