M10 enlarged flat washer, what is the difference between the washer and the washer + the product appearance is as smooth as jade

m10 enlarged flat washer. Regarding the difference between a washer and a washer, Xiaoshuo has compiled some relevant information for you, and let you understand the understanding of the difference between the two: A washer is two objects The mechanical seal between the two objects is usually used to prevent pressure, corrosion, and natural expansion and contraction of the pipeline from leakage between two objects. Since the machined surface cannot be perfect, the irregularities can be filled with gaskets. Gaskets are usually made of sheet materials, such as paper backing, rubber, silicone rubber, metal, cork, felt, neoprene, nitrile rubber, glass fiber or plastic polymers (such as polytetrafluoroethylene). Gaskets for certain applications may contain asbestos. A washer is a thin plate (usually round) with a hole (usually in the middle) and is usually used to distribute load thread fasteners. Other uses are as spacers, springs (Belleville gaskets, wave gaskets), wear pads, pre-display devices, lock devices. Rubber gaskets are also used in faucets (valves) to cut off the flow of liquid or gas. Rubber or silicon gaskets can also be used to reduce fan vibration. Usually the outer diameter of the gasket is about twice the inner diameter. Hardware, 15 years of focus on m10 enlarged flat washers, 5000 square meters production workshop, hundreds of precision processing production equipment, 20000+ sets of precision stamping die customized production experience, daily production capacity of 3 million punching times, stamping accuracy up to 0.01mm, 16 quality Strictly check every layer of inspection. It can quickly solve the urgent problem of flat washer time, solve the problem of stamping accuracy, and solve the problem of production quality. Choose, choose rest assured!