Maintenance method of metal stamping parts-hardware

Maintenance methods of metal stamping parts: 1. The pressing parts in the metal stamping parts, such as pressing plates, uniglue, etc.; unloading parts such as stripping plates, pneumatic ejectors, etc. The maintenance of metal stamping parts should check whether the parts of the parts are damaged. If there is damage, it should be corrected in time. The pneumatic jacking should be checked for air leakage, and the detailed conditions should be adopted. If the trachea is damaged, it can be replaced. 2. Springs and other elastic parts in metal stamping parts are easily damaged during use, usually showing cracking and deformation; maintenance methods can be replaced, but in the process of replacement, attention should be paid to the standard and type of springs. The standard and type of the product go through three major items: color, outer diameter and length, and can be replaced only when the three items are the same. 3. During the use of metal stamping parts, punch breakage, twists, and gnawing will occur. Punch sleeves are usually gnawed, and the damage of punches and sleeves is generally replaced with the same standard parts. Need to know more, welcome to consult: