Maintenance requirements for drawing stamping die

When we use a product, we always hope that it can be used for a longer period of time, especially in the industrial field. However, in many cases, the service life of a product is not only affected by its own quality, but also has a huge relationship with daily use and maintenance. This is the case for drawing stamping die. If we want to have a long enough service life for the drawing and stamping die, then it is not only required that the product we choose is a product with guaranteed quality, but also the correct use, maintenance and maintenance of the die. An important aspect. The following is a summary of maintenance and maintenance work. First of all, in order to ensure the accuracy of the product, it is necessary to arrange for staff to regularly check the relevant conditions of the drawing stamping die. If any abnormal situation is found, it needs to be dealt with in time. In addition, it is necessary to check and replace the spring of the mold regularly, which can effectively avoid the fatigue damage of the spring and affect its use. Secondly, in order to ensure its service life, it is best to check it before starting to use it, and pay attention to it during installation. First, clean up the debris on the mold of the stretched metal stamping part and around its installation location. Clean and ensure good cleanliness. After installation, remember to check whether the lubrication of the guide sleeve and the mold is suitable. Then, in the installation process, in addition to requiring professional and experienced masters to operate, professional installation tools must also be used for installation. It is best to use some softer metal such as copper or copper when installing the mold. Operation tools are made of aluminum, etc., and it is strictly forbidden to knock and other actions during installation to prevent damage to the drawing stamping parts. In addition, the installation should be carried out in the correct order, especially for those with orientation requirements, and do not install the wrong or reverse installation. Finally, in the process of use, when the die of the drawing stamping part is found to be worn, it must be stopped in time and repaired in time to prevent the situation from continuing to deteriorate, which may cause serious die wear and reduce life, or affect processing quality. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections