Maintenance requirements for drawing stamping parts

The performance of the drawing stamping parts is not only related to its manufacturing accuracy and the influence of the material used, but also has a great relationship with our daily use habits. In other words, if you want to properly extend the service life of drawing stamping parts, we also need our careful maintenance to be able to achieve. So, what issues should be paid attention to during maintenance? For this question, we specifically summarized the relevant content. Now I will share the main content with everyone, hoping to bring some help. The first point is that before installing the drawing stamping parts, it should be carefully inspected and the debris on the surface should be removed. At the same time, it is also necessary to check whether the guide sleeve and the mold are well lubricated. If you find any abnormal situation, you need to deal with it in time, don't delay. Secondly, in daily use, we also need to pay more attention. For example, if we see that the punch and die edges of the drawing stamping parts are worn out, then we should stop using them and sharpen them in time. So as not to cause more serious wear, otherwise, it may further deteriorate the situation and affect the performance and service life of the product. Then, if we want to extend the service life of the drawing stamping parts as much as possible, we must not only do the above content, but also regularly check and replace the spring of the mold. Otherwise, if the spring is fatigued and damaged, it will affect the product. Normal use. Therefore, as a user, you should memorize these contents and put them in place in actual work. In short, for drawing and stamping parts, we need to do the corresponding maintenance and maintenance. Only in this way can we prolong its service life. At the same time, it can also reduce our production costs to a certain extent and protect the production work. The successful completion. Therefore, it is recommended that all users and friends, be sure to do a good job in the maintenance of drawing stamping parts. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections